Can You Use Brake Booster Tube On 2018 Rav4 To Add Seafoam To Engine

Key Benefits

Bounding main Foam Spray is specially designed to clean harmful intake valve & sleeping room area deposits
Critically important for cleaning GDI intake valves
Helps your engine run cleaner & last longer
Safe & easy to utilize – no special tools required!

Directions

For Gas Fuel Injection

Run engine to warm intake, then turn off accessories and shut off engine.
Loosen and remove intake boot from throttle body.
With Hook Guide and Cleaning Tube placed in the throttle body, straight tube nozzle end ¼" in front of throttle plate location where the throttle plate opens away from nozzle (meet diagram).
Re-fit the intake boot over the Hook Guide and throttle body.
With vehicle in park and parking brake applied, start engine and hold RPM steady at two,000 for the elapsing of the application.
Spray continuously until contents are empty (approx. 7 minutes), then shut off the engine and remove intake boot to recover Hook Guide and Tube.
With engine turned off, re-secure the intake kicking onto the throttle body and let engine to hot soak for 10 minutes.
Afterward hot soak, starting time and drive the vehicle under engine load for 10 minutes or longer. Employ spirited acceleration when prophylactic to burn off hydrocarbon residues.
DO Non spray into the mass air flow sensor.
Practice NOT use a scan tool to increase RPM via the air bypass valve.
Not for use with diesel air intake systems.

For Carburetor Intakes

Run engine to warm intake, then shut off.
Remove air filter to access carburetor throat.
With air filter removed, first engine and place tube nozzle into carburetor throat.
Depending on engine size, utilise 2 to 4 ounces sprayed in bursts to avoid engine stalling.
Spray a long burst, close off engine and allow to hot soak for 10 minutes.
After hot soak, start and operate engine for x minutes or longer.

For Engine Fogging

With the engine running, insert Sea Foam Spray tube (cut to shorten if needed) into intake throat (if carburetor) or direct before throttle plate opening (if fuel injection).
Spray a series of iii to 5 bursts, then a final straight stream while shutting off engine. For larger engines such as autos with a carburetor intake, employ 6 bursts.
After fogging the intake, let engine to cool & remove spark plugs.
Insert Sea Foam Spray tube to spray each cylinder crenel.
Before re-inserting spark plugs, crank engine to rotate pistons (key turn, or rope pull for small engines). Note: Deep Creep & Sea Foam Spray are interchangeable for sleeping accommodation lubrication.

Summary

Sea Foam Spray is a blend of cleaning and lubricating petroleum ingredients that tin can be used SAFELY in all types of ii and 4 stroke gasoline engines. Peculiarly important for modern GDI engines, information technology cleans critical upper engine areas where fuel cleaners tin't accomplish.

Apply Sea Foam Spray through fuel injection throttle bodies to clean harmful engine deposits from intake valves and combustion bedchamber areas. Employ Sea Foam Spray to fog engines and coat spark plug cavities to protect your engine during storage.

Sea Cream Spray does Not comprise harsh detergent or abrasive chemicals that can harm your engine or fuel system components. Assistance your engine run cleaner and last longer!